RUL 24DA-35A
Low amp draw
12V 6 GPM Standard Bilge Pump with Float Switch (24DA-35A) by Rule Pumps®. Computerized operation on the principle of impeller resistance. Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. Thereafter, it will check for water every 2-1/2 minutes. Power use in the checking mode is minimal.

• Connections: For 19mm (3/4") bore hose.
• Dimensions: 99mm high, 64mm x 74mm.
• Current Draw: 2.1(amps)
• Fuse Size: 2.5(amp)
• Output: Up to 23 litres/minute (5 gallons/minute) without check valve. Max. recommended discharge head 2m.
• Light, compact pump for ski-boats and small vessels.
• Tough plastic body with integral strainer.
• Quick release inlet strainer allows rapid cleaning.
• Low amp draw conserves batteries.
• Built-in Thermal Cut-Off.